Product in spray with a grey tone special for priming resin parts featuring a high opacity once dry. This spray primer can be applied directly on resin, is ul- tra-resistant and with the best adherence.
Clean and degrease the resin parts to be painted. The paint is a synthetic lacquer that cures in a short period of time. Easy to apply, the primer of resin parts will be- come simple and more effective.
Before using you will need to shake the spray well, at least a minute to get a good mixture. Paint with the can in vertical position in fast and thin coats at a distance of about 25 cm., allowing to dry for 5 minutes between layers. At the end of the painting turn the can upside down holding the spray nozzle for a few seconds in this position, until no more paint comes out of the dif- fuser, thus avoiding the obstruction of the diffuser.
Clean and degrease the resin parts to be painted. The paint is a synthetic lacquer that cures in a short period of time. Easy to apply, the primer of resin parts will be- come simple and more effective.
Before using you will need to shake the spray well, at least a minute to get a good mixture. Paint with the can in vertical position in fast and thin coats at a distance of about 25 cm., allowing to dry for 5 minutes between layers. At the end of the painting turn the can upside down holding the spray nozzle for a few seconds in this position, until no more paint comes out of the dif- fuser, thus avoiding the obstruction of the diffuser.
- State
- new
Warning, irritant!
Warning, inflammable!
Not a toy! Not suitable for children under the age of 14!
Documents
AK Interactive, S.L.
Calle Valsalado 6
26006 Logrono
Spanien
E-Mail: [email protected]
Website: www.ak-interactive.com
Calle Valsalado 6
26006 Logrono
Spanien
E-Mail: [email protected]
Website: www.ak-interactive.com
Copyright © 2026 Berliner Zinnfiguren & Preussisches Buecherkabinett
Berliner Zinnfiguren, Knesebeckstr. 88, 10623 Berlin, Germany
Phone 0049 (30) 315 700 0