Phone: 0049 (0)30 315 700 0
- You are here:
- Paints & Tools
- Helpers
- Primers
400 ml
The white spray is ideal for priming figures and models. After drying, the miniatures can be painted with acrylic or oil paints.
Instructions for use:
Before priming, deburr the figure and check for accuracy of fit, sand the surface, clean and degrease with a washing-up liquid, allow to dry. Use only in a dust-free and well-ventilated environment.
Shake well before use (approx. two minutes). The mixing ball must be clearly audible. Spray on a sheet of paper first to test. Shake from time to time during use.
Position the model so that it can be sprayed from all sides without touching it and turned if necessary.
Spray at a distance of approx. 20-30 cm. Apply paint evenly.
Several thin coats are better than one thick coat, as this can cause details to stick together. Wait until each coat is thoroughly dry, but not longer than 30 minutes.
The primer is dry to the touch after 10-15 minutes. The drying time is at least 48 hours. The model can now be painted.
Finally, to clean the spray valve, spray out the can with the spray head facing downwards. If the spray head is blocked, remove it and clean it with universal thinner. When putting on the spray head, make sure that the spray opening faces away from the body, as paint may escape.
Extremely flammable, irritant.
Danger: Repeatet exposury may cause skin dryness or cracking. Extremely flammable. Pressured Container: may burst if heated. Caused serious eye irritation. May cause drowsiness or dizziness. May cause change organs through prolonged or repeated exposure. Toxic to aquatic life with long lasting effects. Keep away from heat, hot surfaces, sparks, open flames or other ignitions sources. Not smoking. Do not pierce or burn, even after use. If in eye: Rinse continously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritations persists: get medial advice/attention. Store in a well ventilated place. Keep container tightly closed. protect from sunlight. Do not expose to temperatures exceeding 50 °C / 122 °F. keep out of reach of children. If medical advise is needed have product ot label at hand. Emergency number: +32 70 245 245
The white spray is ideal for priming figures and models. After drying, the miniatures can be painted with acrylic or oil paints.
Instructions for use:
Before priming, deburr the figure and check for accuracy of fit, sand the surface, clean and degrease with a washing-up liquid, allow to dry. Use only in a dust-free and well-ventilated environment.
Shake well before use (approx. two minutes). The mixing ball must be clearly audible. Spray on a sheet of paper first to test. Shake from time to time during use.
Position the model so that it can be sprayed from all sides without touching it and turned if necessary.
Spray at a distance of approx. 20-30 cm. Apply paint evenly.
Several thin coats are better than one thick coat, as this can cause details to stick together. Wait until each coat is thoroughly dry, but not longer than 30 minutes.
The primer is dry to the touch after 10-15 minutes. The drying time is at least 48 hours. The model can now be painted.
Finally, to clean the spray valve, spray out the can with the spray head facing downwards. If the spray head is blocked, remove it and clean it with universal thinner. When putting on the spray head, make sure that the spray opening faces away from the body, as paint may escape.
Extremely flammable, irritant.
Danger: Repeatet exposury may cause skin dryness or cracking. Extremely flammable. Pressured Container: may burst if heated. Caused serious eye irritation. May cause drowsiness or dizziness. May cause change organs through prolonged or repeated exposure. Toxic to aquatic life with long lasting effects. Keep away from heat, hot surfaces, sparks, open flames or other ignitions sources. Not smoking. Do not pierce or burn, even after use. If in eye: Rinse continously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritations persists: get medial advice/attention. Store in a well ventilated place. Keep container tightly closed. protect from sunlight. Do not expose to temperatures exceeding 50 °C / 122 °F. keep out of reach of children. If medical advise is needed have product ot label at hand. Emergency number: +32 70 245 245

Warning, irritant!

Warning, harmful to health!

Warning, inflammable!

Warning, harmful to environment!
Not a toy! Not suitable for children under the age of 14!
Documents
Berliner Zinnfiguren e. K. Werner Scholtz
Knesebeckstr. 88
10623 Berlin - Charlottenburg
Deutschland
E-Mail: [email protected]
Website: www.zinnfigur.com
Knesebeckstr. 88
10623 Berlin - Charlottenburg
Deutschland
E-Mail: [email protected]
Website: www.zinnfigur.com
The following articles may also interest you
Take a look at our similar products.Copyright © 2026 Berliner Zinnfiguren & Preussisches Buecherkabinett
Berliner Zinnfiguren, Knesebeckstr. 88, 10623 Berlin, Germany
Phone 0049 (30) 315 700 0