UHU plus schnellfest

Processing time (pot life) up to 5 minutes, hand strength after approx. 20 minutes.

- UHU plus fast-setting is a solvent-free 2-component epoxy resin adhesive
- for fast, high-strength bonding on small surfaces
- Mixing ratio binder : hardener = volume 1 : 1.
- Processing time (pot life) up to 5 minutes, hand strength after approx. 20 minutes
- Final strength is approx. 13N/mm²
- hardens transparently
- Bonding is impact-resistant and resistant to ageing and the effects of moisture

Solvent-free, two-component epoxy resin-based adhesive for fast, resilient bonds. Enables high-strength adhesive bonds on almost all solid materials. The working time is up to 5 minutes, hand strength is achieved after 20 minutes. The final strength is approx. 13N/mm². The adhesive bond hardens transparently, is impact-resistant and resistant to ageing and moisture.

Materials
Bonds metals, glass, porcelain, ceramics, wood, marble, stone, concrete, duroplastics, glass fibre reinforced plastics, rigid PVC, rubber, rigid foam plastics, e.g. Styropor®. Unsuitable for bonding large glass surfaces, PE, PP.

Processing
Bonding surfaces must be dry and free of dust and grease. Roughen smooth surfaces. Mix binder and hardener in a ratio of 1:1 (strands of equal length). Apply adhesive to one side, or both sides in the case of rough materials. Join parts together without pressing. Processing time (pot life): Approx. 5 minutes. Hardening time: Solid after approx. 20 to 30 minutes at room temperature.