Addition curing 2-component silicone rubber that vulcanises at room temperature (RTV).
You receive the silicone in high quality plastic squeeze bottles with dosing cap. This makes removal very easy and clean. Exact dosing is effortless, as you know it from comparable food packaging and is a clear improvement on the otherwise usual tinplate cans or wide-neck bottles.
Properties and application: - easy processing - problem-free mixing of components 1:1 by weight - very good flowability, mixture is easy to pour - cross-linking to form resistant, rubber-elastic vulcanizate without heat of reaction - short-time temperature resistant up to 150 ° C - high tensile strength and high flexibility - very high detail fidelity in reproduction - excellent anti-stick effect for easy release of the models - use with larger, self-supporting moulds for impressions of any kind
Further product information: Colour: light green (component A) and white (component B) Mixture: 1:1 by weight Specific gravity: 1.1 Viscosity 4000 ± 300 cP Mixing time at 23 degrees Celsius 1 minute Processing time (pot life) at 23 degrees Celsius 6 minutes Curing time at 23 degrees Celsius 20 minutes Hardness Shore A after 24 hours 35 ± 2 Breaking load 3,0 ± 0.2 N/mm² Elongation at break 300 ± 20 % Tear strength 20 ± 1 N/mm Reproduction detail accuracy: 2 micron Dimensional change after 24 hours 0.02 %
TFC Silicone Rubber Type 2 is very suitable for the production of demanding, elastic and hard-wearing moulds with undercuts.
TFC Silicone Rubber Type 2 can be used to produce one-piece or multi-piece moulds, for moulding original models made of wood, glass, metal, plastic, wax, ceramic casting compounds. You can use the moulds produced with all water-soluble casting materials such as. Relief casting compounds such as Stewalin, Plastalin Super, Keraflott or plaster, Keramin, Alabit, modelling and model building plaster, casting clay, cement, concrete, etc.
Also soap casting compounds (soap glycerine) for making your own soap or waxes for making candles are possible without any problems as well as casting with casting resins (resin). In this case, you should pre-treat the mould with a release agent before casting, as casting resins can lead to embrittlement of the mould after repeated casting. Generally, silicone type 2 has a very long service life.
The silicone has not been tested for skin and mucous membrane compatibility or for use in conjunction with food. If you are looking for silicones that you would like to use in conjunction with food or body impressions, please ask us.
Group
Mould
State
New
Not a toy! Not suitable for children under the age of 14!
