Berliner Zinnfiguren/Paints & Tools/Paints products

Liquid glue for plastics 6,15 €

Tue, 16 Jun 2026 06:25:05 +0200

Contents 25 g

White 3,55 €

Tue, 16 Jun 2026 06:45:07 +0200

FS37925

Liquid glue for plastics professional mini 4,65 €

Wed, 03 Jun 2026 07:23:43 +0200

Contents 12,5 g

Flat White 5,45 €

Tue, 16 Jun 2026 06:25:05 +0200

Tamiya X and XF acrylic paints are made from water-soluble acrylic resins and are ideal for painting with a brush or for application with an airbrush.
These paints can be used on styrene resins, styrofoam, wood and all common model plastics. For better adhesion, we recommend priming the respective material beforehand (Tamiya Primer e.g. 358/87044 Primer White). The paint covers well, flows smoothly and is easy to mix. Before curing, the paint can be washed away with normal water.

- Colours marked "X" have a glossy finish, while those marked "XF" are matt.

- For airbrush application (0.25 - 0.50 mm depending on the nozzle used), the X-/XF colours should be thinned with Tamiya X-20A Acrylic Thinner (358/X20A, 358/X20B or 358/X20C).

- The X-/XF colours can also be thinned with Tamiya Lacquer Thinner (358/87077). This allows for faster drying and a harder surface finish.

- Adding Tamiya Paint Retarder (358/87114) will give you a smoother finish after drying (max. mixing ratio 1:10).

Acrylic Thinner 6,85 €

Mon, 01 Jun 2026 06:50:14 +0200

We recommend using the thinner to preserve the properties of the paint, applying thin layers without clogging in the airbrush. The paints are perfectly applied with a pressure of 18 PSI but it is possible to airbrush under other pressure levels too.

High quality thinner for acrylic paints. Use it for maximum performance with the airbrush and prevent the paint jamming or clogging. You can use it with brush too. Use our Perfect Cleaner AK119 to clean the airbrushes and brushes.

Mr. Finishing Surfacer 1500 Black 7,15 €

Wed, 10 Jun 2026 06:40:09 +0200

This surfacer can be applied to give a final finish to the surface more smoothly.It has the characteristic of being fine grained and it is not prone to clogging up detail in the mold. Most suitable not only for making a base before painting but also for surface finishing of an original mold before casting.

White Spirit 6,60 €

Tue, 16 Jun 2026 06:45:07 +0200

High quality thinner for washes, streaking, enamels and oils. It is perfect to stump the colors, to dilute the colors or clean your tools.

Mr.Color Leveling Thinner 400 12,25 €

Wed, 03 Jun 2026 07:05:09 +0200

Perfect suitable for airbrush. Mixing 1:1 or 1:2. Exact levelling, shiny surface. 400 ml

White, Matt - Email Color 2,75 €

Tue, 16 Jun 2026 06:25:05 +0200

RAL 9001

'Revell Color' is a synthetic resin enamel paint that does not damage the outer surface of plastic models. Many other materials can also be painted with the 14 ml tin preferred by many DIY enthusiasts. All shades - except signal colours - can be mixed together and can be diluted with 'Revell Color Mix'. Thus the paint can be applied not only with brushes, but also with a spray gun. For cleaning use 'Revell Painta Clean' for brushes and 'Revell Airbrush Clean' for the spray gun. It is possible to apply another colour or coat of paint after only 4 6 hours. The paint is completely dry after 24 hours.

Black 3,55 €

Sun, 07 Jun 2026 07:55:06 +0200

FS37038

Flat Black 5,45 €

Thu, 18 Jun 2026 11:44:01 +0200

Xtreme Cleaner 6,60 €

Sat, 13 Jun 2026 07:20:05 +0200

High quality airbrush cleaner for our Xtreme Metal range. It can be used for all of our range of metallic colours as well as other purposes, such as cleaning tools, diluting putty or other brand paints that have the same base components. Xtreme Metal is a new, high quality metallic range, developed with outstanding pigments, and specially formulated to give you the best results. Resistant to masking, any type of weathering, with ultra high coverage power, and fast drying. Now its easy to clean your airbrush without leaving any pigment/paint debris. These are quite simply the highest quality metallic paints ever seen.

MATT VARNISH SPRAY 12,15 €

Tue, 16 Jun 2026 15:42:14 +0200

High Quality Varnish to get an amazing Gloss varnish with a non-yellowing stability. Ultra resistant and with the best adherence. Before using you will need to shake the spray well, at least a minute to get a good mixture. Paint with the can in vertical position in fast and thin coats at a distance of about 25 cm., allowing to dry for 5 minutes between layers. At the end of the painting turn the can upside down holding the spray nozzle for a few seconds in this position, until no more paint comes out of the diffuser, thus avoiding the obstruction of the diffuser.

Stainless Steel Paint Mixers 3,95 €

Tue, 09 Jun 2026 06:35:08 +0200

This set includes more than 80 stainless steel balls perfect for use as agitators in any paint. Add a pair to your jars and paint work will be much easier, faster, and effective. To make a paint reach its optimum performance, it is necessary that all components are thoroughly mixed. Valid for acrylics, lacquers, enamels and any other type of liquid paint. Will not rust or alter the color.

Black, Matt - Email Color 2,75 €

Wed, 17 Jun 2026 11:03:32 +0200

RAL 9011

'Revell Color' is a synthetic resin enamel paint that does not damage the outer surface of plastic models. Many other materials can also be painted with the 14 ml tin preferred by many DIY enthusiasts. All shades - except signal colours - can be mixed together and can be diluted with 'Revell Color Mix'. Thus the paint can be applied not only with brushes, but also with a spray gun. For cleaning use 'Revell Painta Clean' for brushes and 'Revell Airbrush Clean' for the spray gun. It is possible to apply another colour or coat of paint after only 4 6 hours. The paint is completely dry after 24 hours.

Mat varnish 3,55 €

Mon, 08 Jun 2026 06:45:13 +0200

Matt protective film which is applied after painting the figure.

FINE PRIMER WHITE SPRAY (Spray Primer) 12,15 €

Tue, 16 Jun 2026 15:42:14 +0200

Easy to apply, the primer of plastic models will become simple and more effective. This primer has excellent coverage and is recommended for use prior to painting. Works on plastic or metal. These cans of spray paint are extremely useful for painting large or small surfaces. The paint is a synthetic lacquer that cures in a short period of time.

AK spray paints are not affected by acrylic, enamel paints or extreme weathering. Ultra resistant and with the best adherence. Before using you will need to shake the spray well, at least a minute to get a good mixture.

Airbrush Thinner, 200ml -large- 14,35 €

Tue, 09 Jun 2026 06:35:08 +0200

Thinner für Model Air and Liquid Acrylic. Dilutes color without loss of adhesion, resistance and consistency.

White (Airbrush) 3,55 €

Mon, 01 Jun 2026 06:50:14 +0200

Mr. Finishing Surfacer 1500 Gray 7,15 €

Mon, 01 Jun 2026 06:50:14 +0200