Berliner Zinnfiguren/Paints & Tools/Helpers/Glues/Metal products

Roket Rapid 7,80 €

Mon, 01 Jun 2026 06:30:11 +0200

Roket Rapidis our medium viscosity, fast-setting adhesive, slightly thicker, it sets in 5-10secs. Apply to both parts & bring together.

MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE 8,05 €

Sat, 06 Jun 2026 07:30:19 +0200

General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.

- 99% Cyano.
- Ethyl cyanoacrylate
- Use temperature: -55º to 120º
- Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
- Definitive cure time: 24 h
- Viscosity: 110 mPa.S
- Shear strength: 21.0 MPa

* Bottles are not filled at a 100% to leave some air and make it work properly.

Tamiya CA Cement Gel Type 4,95 €

Tue, 09 Jun 2026 06:20:05 +0200

Cement Gel Type

Roket Hot 7,80 €

Tue, 02 Jun 2026 06:25:06 +0200

Super thin, penetratimg glue. Bonds 1-5 sec.

INSTANT DRY CYANOACRYLATE 8,75 €

Sun, 14 Jun 2026 07:50:05 +0200

Cyanoacrylate type glue suitable for bonding a large number of materials including plastic, metal, wood and resin among others. Provides an extremely strong bond in only 10-15 seconds. Always clean the surfaces to be joined before application. TRUE Cyanoacrylate can be applied directly from its nozzle or by using a fine tool for greater precision. The resulting joint will resist temperatures up to 150 degrees Celsius, and forces up to 180 kg / cm2. The adhesive flows easily by capillary action and is resistant to water, stress, and vibration.
It also withstands water, shock and vibration perfectly. It can be used directly from its nozzle or applied with a pointed tool for greater precision acting easily by capillarity

Tamiya CA Cement Quick Type 5,75 €

Tue, 09 Jun 2026 06:20:05 +0200

With fine cannulas for targeted gluing.

Loctite instant adhesive, liquid, transparent 6,25 €

Fri, 08 May 2026 06:40:05 +0200

Seconds fast and super strong. Flows into even the smallest crevices. Suitable for metal, resin, porcelain, wood, rubber, cardboard and many plastics. Waterproof. Not suitable for polyethylene, polypropylene, PTFE, Styrofoam.and glass.

UHU Hart Adhesive for modelling and plastics 7,75 €

Tue, 09 Jun 2026 06:35:08 +0200

Crystal-clear, quick setting nitrocellulose adhesive for assembling small parts in modelling, craft work and in the home. 35g.

UHU hard is a crystal-clear, quick-drying adhesive for bonding small parts for handicrafts, modelling and household use. UHU hard is also suitable for stiffening and sealing many material surfaces. Dries hard.

Hazard statements / H-phrases
H225: Highly flammable liquid and vapour.
H319: Causes serious eye irritation.
H336: May cause drowsiness or dizziness.

Precautionary statements for hazardous substances / EHU phrases
EUH066: Repeated exposure may cause skin dryness or cracking.

Precautionary statements / P-phrases
P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of the reach of children.
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.
P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
P501: Contents/container ... ...

Quick-drying glue 5,45 €

Thu, 04 Jun 2026 06:50:15 +0200

Revell Contacta Quick - The perfect adhesive for connections in seconds. Particularly suitable for plastic model making but also ideal for ceramics, porcelain, wood, leather, metal, cardboard and many plastics.

Roket Odourless 12,95 €

Tue, 02 Jun 2026 06:25:06 +0200

Crystal clear,foam-safe, non-blooming cyano glue. Bonds 10-20 sec.

UHU plus sofortfest 19,95 €

Sun, 10 May 2026 07:43:46 +0200

Can be worked in 2 minutes, solid after 5 minutes!
2-component adhesive on an epoxy resin base for particularly quick assemblies over small areas. Working time up to 2 minuntes, initial strength achieved after 5 minutes.

2-component epoxy resin adhesive, 2 minutes Solvent-free two-component epoxy resin-based adhesive for particularly fast bonding on small surfaces. The working time is up to 2 minutes, hand strength is achieved after 5 minutes. The final strength is 800 N/cm². The adhesive bond hardens transparently, is impact-resistant and resistant to ageing and moisture.

Hazard statements / H-phrases
H315: Causes skin irritation.
H317: May cause an allergic skin reaction.
H319: Causes serious eye irritation.
H411: Toxic to aquatic life with long lasting effects.

Precautionary statements for hazardous substances / EHU phrases
EUH205: Contains epoxy-containing compounds. May produce an allergic reaction.

Precautionary statements / P-phrases
P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of the reach of children.
P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352: IF ON SKIN: Wash with plenty of water/....
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.

Contacta Liquid Special 8,75 €

Wed, 03 Jun 2026 07:23:43 +0200

Revell Contacta Liquid Special is a special chrome glue, but can be used very universally. Since the chrome layer prevents the welding effect, you either scratch away the chrome layer or - much more elegant - use the special glue from Revell. Also clear parts such as windows or cockpit canopies can be mounted well with it, because these transparent parts are not attacked by it. Revell Contacta Special also glues metal, wood, paper, cardboard, glass and textiles both to plastic and to each other.

Special features:
- Without plastic welding effect
- Liquid consistency of the adhesive
- With brush located in the lid
- Suitable for bonding chrome parts
- Suitable for bonding clear parts
- Also bonds other materials

Deluxe: Tacky Glue 80ml 7,50 €

Sat, 18 Apr 2026 08:40:15 +0200

High adhesion and yet can be corrected for a short time. Glues textiles, silk, wallpaper, wood, ceramics, glass, foam, metal, various plastics. Also on glazed or varnished surfaces. Dries in approx. 30 - 60 min.

Tamiya CA Cement Quick Type II 5,55 €

Sat, 16 May 2026 02:17:15 +0200

Superglue

FIX-kit Power Knete 9,95 €

Tue, 21 Apr 2026 07:50:11 +0200

FIX-kit Power Knete is a 2-component adhesive in ready portioned units. The components are mixed by simple kneading and the mass can then be pressed into cavities. cavities. There is no need for troublesome mixing.

- Easy handling
- Hardens completely within 1 hour

UHU plus schnellfest 22,65 €

Tue, 12 May 2026 06:45:09 +0200

Processing time (pot life) up to 5 minutes, hand strength after approx. 20 minutes.

- UHU plus fast-setting is a solvent-free 2-component epoxy resin adhesive
- for fast, high-strength bonding on small surfaces
- Mixing ratio binder : hardener = volume 1 : 1.
- Processing time (pot life) up to 5 minutes, hand strength after approx. 20 minutes
- Final strength is approx. 13N/mm²
- hardens transparently
- Bonding is impact-resistant and resistant to ageing and the effects of moisture

Solvent-free, two-component epoxy resin-based adhesive for fast, resilient bonds. Enables high-strength adhesive bonds on almost all solid materials. The working time is up to 5 minutes, hand strength is achieved after 20 minutes. The final strength is approx. 13N/mm². The adhesive bond hardens transparently, is impact-resistant and resistant to ageing and moisture.

Materials
Bonds metals, glass, porcelain, ceramics, wood, marble, stone, concrete, duroplastics, glass fibre reinforced plastics, rigid PVC, rubber, rigid foam plastics, e.g. Styropor®. Unsuitable for bonding large glass surfaces, PE, PP.

Processing
Bonding surfaces must be dry and free of dust and grease. Roughen smooth surfaces. Mix binder and hardener in a ratio of 1:1 (strands of equal length). Apply adhesive to one side, or both sides in the case of rough materials. Join parts together without pressing. Processing time (pot life): Approx. 5 minutes. Hardening time: Solid after approx. 20 to 30 minutes at room temperature.

BLACK SLOW DRY CYANOACRYLATE 9,75 €

Wed, 10 Jun 2026 06:40:09 +0200

High quality cyanoacrylate glue resistant to moisture, shocks, and vibrations.

This product can be used to glue plastic, resin, photo-etch, some metals, and similar materials. Hold the pieces together for 10-15 seconds to ensure proper bond. The black colour makes the glue highly visible, once dry the black cyanoacrylate can be sanded and carved easily.

The black colour makes the glue stand out from the surface and facilitates sanding away the excess which enables this product to be used as putty while further strengthening the joint. It is ideal for filling the seams between large parts such as an aircraft fuselage, tank hull, or any other gap in the plastic parts of your models.

Be careful to seal the container tightly to prevent hardening. Use the adhesive with the appropriate protective equipment including gloves, clothing, and eye protection while working in a well-ventilated area. Store in a cool place for the longest shelf life, ideally 16 °C (60 °F). Avoid contact with the skin and eyes.

Tacky Glue 7,50 €

Sat, 18 Apr 2026 07:10:23 +0200

High adhesion and yet can be corrected for a short time. Bonds textiles, silk, wallpaper, wood, ceramics, glass, foam, metal, various plastics. Also on glazed or painted surfaces. Dries in approx. 30 - 60 min.

Magnet Glue Standard 8 g 5,85 €

Thu, 21 May 2026 07:00:13 +0200

Medium viscosity cyanoacrylate
For fast, strong and clean bonds. They stand out for their speed, bonding strength, precision, and variety of formats.
The standard cyanoacrylate in the family is suitable for a wide variety of applications. It provides a durable and strong bond in just a few
8g pot with a brush.