Berliner Zinnfiguren/Paints & Tools/Helpers/Glues products

Loctite instant adhesive, liquid, transparent 6,25 €

Fri, 08 May 2026 06:40:05 +0200

Seconds fast and super strong. Flows into even the smallest crevices. Suitable for metal, resin, porcelain, wood, rubber, cardboard and many plastics. Waterproof. Not suitable for polyethylene, polypropylene, PTFE, Styrofoam.and glass.

UHU Hart Adhesive for modelling and plastics 7,75 €

Tue, 09 Jun 2026 06:35:08 +0200

Crystal-clear, quick setting nitrocellulose adhesive for assembling small parts in modelling, craft work and in the home. 35g.

UHU hard is a crystal-clear, quick-drying adhesive for bonding small parts for handicrafts, modelling and household use. UHU hard is also suitable for stiffening and sealing many material surfaces. Dries hard.

Hazard statements / H-phrases
H225: Highly flammable liquid and vapour.
H319: Causes serious eye irritation.
H336: May cause drowsiness or dizziness.

Precautionary statements for hazardous substances / EHU phrases
EUH066: Repeated exposure may cause skin dryness or cracking.

Precautionary statements / P-phrases
P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of the reach of children.
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.
P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
P501: Contents/container ... ...

UHU plus sofortfest 19,95 €

Sun, 10 May 2026 07:43:46 +0200

Can be worked in 2 minutes, solid after 5 minutes!
2-component adhesive on an epoxy resin base for particularly quick assemblies over small areas. Working time up to 2 minuntes, initial strength achieved after 5 minutes.

2-component epoxy resin adhesive, 2 minutes Solvent-free two-component epoxy resin-based adhesive for particularly fast bonding on small surfaces. The working time is up to 2 minutes, hand strength is achieved after 5 minutes. The final strength is 800 N/cm². The adhesive bond hardens transparently, is impact-resistant and resistant to ageing and moisture.

Hazard statements / H-phrases
H315: Causes skin irritation.
H317: May cause an allergic skin reaction.
H319: Causes serious eye irritation.
H411: Toxic to aquatic life with long lasting effects.

Precautionary statements for hazardous substances / EHU phrases
EUH205: Contains epoxy-containing compounds. May produce an allergic reaction.

Precautionary statements / P-phrases
P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of the reach of children.
P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352: IF ON SKIN: Wash with plenty of water/....
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.

UHU plus schnellfest 22,65 €

Tue, 12 May 2026 06:45:09 +0200

Processing time (pot life) up to 5 minutes, hand strength after approx. 20 minutes.

- UHU plus fast-setting is a solvent-free 2-component epoxy resin adhesive
- for fast, high-strength bonding on small surfaces
- Mixing ratio binder : hardener = volume 1 : 1.
- Processing time (pot life) up to 5 minutes, hand strength after approx. 20 minutes
- Final strength is approx. 13N/mm²
- hardens transparently
- Bonding is impact-resistant and resistant to ageing and the effects of moisture

Solvent-free, two-component epoxy resin-based adhesive for fast, resilient bonds. Enables high-strength adhesive bonds on almost all solid materials. The working time is up to 5 minutes, hand strength is achieved after 20 minutes. The final strength is approx. 13N/mm². The adhesive bond hardens transparently, is impact-resistant and resistant to ageing and moisture.

Materials
Bonds metals, glass, porcelain, ceramics, wood, marble, stone, concrete, duroplastics, glass fibre reinforced plastics, rigid PVC, rubber, rigid foam plastics, e.g. Styropor®. Unsuitable for bonding large glass surfaces, PE, PP.

Processing
Bonding surfaces must be dry and free of dust and grease. Roughen smooth surfaces. Mix binder and hardener in a ratio of 1:1 (strands of equal length). Apply adhesive to one side, or both sides in the case of rough materials. Join parts together without pressing. Processing time (pot life): Approx. 5 minutes. Hardening time: Solid after approx. 20 to 30 minutes at room temperature.

UHU universal, multi-purpose and contact adhesive 5,35 €

Thu, 21 May 2026 06:45:07 +0200

Stick as firmly as the classic. Quick drying, transparent when dry. 35 g/ml.
Not for styrofoam.

UHU extra all-purpose adhesive is the unique, gel-like synthetic resin adhesive for fast and crystal-clear bonding. The gel-like consistency of the adhesive enables drip-free and clean bonding, the adhesive does not flow away. Ideal for vertical surfaces. No paper curling.

Hazard statements / H-phrases
H225: Highly flammable liquid and vapour.
H336: May cause drowsiness or dizziness.

Precautionary statements for hazardous substances / EHU-phrases
EUH066: Repeated exposure may cause skin dryness or cracking.

Precautionary statements / P-phrases
P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of the reach of children.
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.
P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
P302+P352: IF ON SKIN: Wash with plenty of water/ ....
P501: Contents/container ... ...

UHU Patafix white 6,25 €

Fri, 01 May 2026 07:25:12 +0200

80 removable and reusable adhesive pads. For fixing and fastening e.g. when gluing or painting. Best mounting aid.

Suitable for removable and at the same time permanent bonding of smaller objects to wood, cement, glass, metal, plastic and porcelain. Suitable for attaching posters, decorations, small electronic devices, cables and much more.

Surface requirements:
The surfaces to be stuck must be dry and free of dust and grease.

Instructions for use:
1) Peel off the pads and 2) Knead until soft. 3) Apply UHU patafix to the object to be fixed. 4) Fix the object to the desired surface by pressing firmly. To reuse: repeat the steps from 2).

Properties:
- Removable and reusable
- Quick and clean attachment
- Permanent adhesion
- Dermatologically tested
- Made in Germany

Personal safety:
Keep out of reach of children: There is a risk of mistaking the adhesive pads for chewing gum.

Stains/residue:
Possible residue can be removed by dabbing with another adhesive pad. UHU patafix may possibly leave a greasy mark on absorbent surfaces; these can normally be removed with benzine.
Storage conditions

The product should be stored in a dry, cool and frost-free place.

Microbrush - Blue / Regular Brush 6,55 €

Mon, 01 Jun 2026 06:50:14 +0200

For precise and accurate application of glue, paints, decal solutions etc.
Flexible, tapered heads for easy positioning - excellent for those hard to reach places and compound curves.
Items Green Yellow and White - application fibres are made from a non-absorbent, non-linting material which creates and holds a nondrip bubble of media ready for application.
Item Black - is a brush made from non-absorbent, non-linting bristles that will hold a bubble of solution as small as 3 mm - allows for precise and efficient solution application.

Pack contains 25 brushes.

MR.CEMENT DELUXE 4,55 €

Sun, 07 Jun 2026 07:55:06 +0200

Mr.CEMENT is appropriate for attachment between plastic parts in models (sterol resin plastics). Mr.CEMENT has a suitable adhesion and strong strength because it contains high-quality resins. Contains a brush.

Mr.Cement S 6,15 €

Wed, 20 May 2026 07:00:12 +0200

Mr. Cement S is a "BRUSH ON" type low viscosity cement. It dries faster than MC124/MC127 Mr. Cement, so it is suitable for attaching fragile pastic parts together quickly. You must put together the plastic parts, and then brush on this cement on the gap between the two parts.

Mr.Cement SP BLACK 6,85 €

Mon, 29 Jun 2026 07:00:06 +0200

Black color comes in Mr.CEMENT SP. It colors application in black as you can see where you apply on.

For plastic plate craft, applied surface turned in lack so that you can measure precisely. It is a kind of pigment that is covered by coating paint.

ULTRA GLUE - FOR ETCH, CLEAR PARTS & MORE 4,50 €

Wed, 24 Jun 2026 07:00:06 +0200

High strength acrylic glue. Specially designed to fix photo-etched or transparent parts comfortably without leaving any residue whatsoever. Jar 40mL.

High strength acrylic glue. Specially designed to fix photo-etched or transparent parts comfortably without leaving any residue whatsoever. This formula is also perfect for all types of cardboard building materials, various types of paper or laser-cut cardboard, and wood. You can also use it when creating dioramas to firmly secure groundwork products. ULTRA-GLUE can be precisely applied with a brush and can be diluted and cleaned with water. Dries to a completely transparent finish in 24hours.

MEDIUM DENSITY CEMENT. SLOW DRY 4,25 €

Sat, 27 Jun 2026 07:45:06 +0200

Medium density and high strength cement for use in assembling plastic scale models. It is particularly useful for gluing large components that need a strong initial bond. Clean the contact surfaces before applying the product. This cement will allow you to move and adjust the parts for a few seconds before it starts to harden. Dries completely in one hour and leaves no residue. This adhesive can be easily sanded and reworked once fully cured.

Standard Cement 4,50 €

Tue, 23 Jun 2026 07:10:06 +0200

High-strength cement for use in assembling plastic scale models. The consistency lies between that of Extra Thin Cement (336/2025) and Medium Density Cement (336/2038). It is particularly useful for gluing medium-sized components that require a strong bond. Clean the contact surfaces before applying the product. This adhesive allows you to move and adjust the parts for a few seconds before it begins to harden. Dries completely transparent in 30 minutes. This adhesive can be easily sanded and reworked once fully cured.

Night Blue Cement 4,50 €

Sat, 27 Jun 2026 07:55:05 +0200

High-strength cement for use in assembling plastic scale models. The consistency lies between that of Extra Thin Cement (336/2025)
and Medium Density Cement (336/-2038). It is particularly useful for gluing medium-sized components that require a strong bond. Clean
the joining areas and apply the product. Clean the contact surfaces before applying the product. This adhesive allows you to move and
adjust the parts for a few seconds before it begins to harden.
Dries completely transparent in 30 minutes. This adhesive can be easily sanded and reworked once fully cured.

Red Magma Cement 4,50 €

Sat, 27 Jun 2026 07:55:05 +0200

Red colour extra-thin cement for use in assembling plastic scale models.
Hold the parts together, apply the cement to the joint and allow it draw itself into the gap by capillary action. Its red colour stands out against the plastic surface, clearly showing where it is being applied. This also allows you be sure the entire joint is covered and will facilitate the sanding process. Completely dries in 10 minutes.

Ultra Glue Matt 4,50 €

Tue, 23 Jun 2026 07:15:06 +0200

High strength acrylic glue. Specially designed to fix photo-etched or transparent parts without leaving any residue whatsoever. Matt finish for use over painted surfaces and all types of cardboard building materials, various types of paper or laser-cut cardboard, and wood.

BLACK SLOW DRY CYANOACRYLATE 9,75 €

Tue, 30 Jun 2026 07:00:08 +0200

High quality cyanoacrylate glue resistant to moisture, shocks, and vibrations.

This product can be used to glue plastic, resin, photo-etch, some metals, and similar materials. Hold the pieces together for 10-15 seconds to ensure proper bond. The black colour makes the glue highly visible, once dry the black cyanoacrylate can be sanded and carved easily.

The black colour makes the glue stand out from the surface and facilitates sanding away the excess which enables this product to be used as putty while further strengthening the joint. It is ideal for filling the seams between large parts such as an aircraft fuselage, tank hull, or any other gap in the plastic parts of your models.

Be careful to seal the container tightly to prevent hardening. Use the adhesive with the appropriate protective equipment including gloves, clothing, and eye protection while working in a well-ventilated area. Store in a cool place for the longest shelf life, ideally 16 °C (60 °F). Avoid contact with the skin and eyes.

DEBONDER (20mL) 9,75 €

Sun, 07 Jun 2026 07:55:06 +0200

This liquid solvent allows modellers to eliminate those annoying traces of cyanoacrylate adhesive that remain on the surface after building.

Debonder can be used on a wide range of surfaces including plastic, resin, and photo etch. Simply apply using a brush or a pipette onto the glue and let it act for about 45 seconds. Then clean the surface with a cloth. If necessary, these steps can be repeated until the cyanoacrylate is completely removed. Do not use this product over painted surfaces.

Always keep this container out of reach of children and tightly sealed, use the solvent with protective equipment in an adequately ventilated area safe from high temperatures. Keep out of reach of children and avoid contact with skin and eyes. If contact occurs, thoroughly rinse immediately with water.

Cyanoacrylate Glue Activator 9,75 €

Tue, 12 May 2026 06:45:09 +0200

Activator is specially formulated to accelerate the curing time of cyanoacrylate glue.

Activator is specially formulated to accelerate the drying of cyanoacrylate glue. It has two systems of application: it can be used with the diffuser quickly and comfortably or with the brush inside for greater precision. This allows an almost immediate and highly durable union of even the smallest parts. It can be applied using two different methods:

Before applying cyanoacrylate: moisten the joint surface with the product and allow it to evaporate for 10-15 seconds. Then apply the glue and quickly join the two pieces together. The parts will bond almost immediately. After applying cyanoacrylate: once the pieces have been joined, apply Activator over the cyanoacrylate. The joint will cure completely in 2-3 seconds, creating a very strong bond.

Be careful to seal the container tightly. Use the accelerator with the appropriate protective equipment including gloves, clothing, and eye protection while working in a well-ventilated area. Store away from heat. Keep out of reach of children. Avoid contact with the skin and eyes.

INSTANT DRY CYANOACRYLATE 8,75 €

Sun, 14 Jun 2026 07:50:05 +0200

Cyanoacrylate type glue suitable for bonding a large number of materials including plastic, metal, wood and resin among others. Provides an extremely strong bond in only 10-15 seconds. Always clean the surfaces to be joined before application. TRUE Cyanoacrylate can be applied directly from its nozzle or by using a fine tool for greater precision. The resulting joint will resist temperatures up to 150 degrees Celsius, and forces up to 180 kg / cm2. The adhesive flows easily by capillary action and is resistant to water, stress, and vibration.
It also withstands water, shock and vibration perfectly. It can be used directly from its nozzle or applied with a pointed tool for greater precision acting easily by capillarity