Berliner Zinnfiguren/Paints & Tools/Tools/Drills products

Drill 1.2mm with 1.5mm shank 5,75 €

Sat, 20 Jun 2026 08:50:14 +0200

Drill 1.1mm with 1.5mm shank 5,75 €

Sat, 20 Jun 2026 08:50:14 +0200

T-800 Mini Electric Drill 94,95 €

Wed, 10 Jun 2026 06:55:08 +0200

5v, 5-speed rechargeable electric mini drill. Lightweight ergonomic design, with 5 sanding/polishing accessories. Size: diameter 21.5 mm (0.84 in), length 171 mm (6.7 in).
The AMMO T-800 mini electric drill will allow you to quickly and efficiently drill holes and do sanding and polishing jobs on your models thanks to its small size and weight. Its ergonomic pen shape will allow you to hold it comfortably in your hand for extended periods of time, and its cordless design means you can use it on your workbench freely without restrictions.
With the universal chuck, you can use a wide variety of drill bits and accessories and change them conveniently thanks to the quick-lock collet. Includes 5 carving/engraving/sanding bits.
The T-800 allows you to select from 35 different speeds for different jobs and materials.
The battery recharges with the USB-C cable included (power adapter not included). A full charge takes 40 minutes and provides 4 hours of operation. The mini drill incorporates a display that shows the battery life status and rotation speed.
Operation is extremely simple via the on/off button (and + / - buttons to increase or decrease the speed):
On/off (1 long press)
Pause/start (1 short press)
Change rotation direction forward and reverse (2 short presses)
How to change the accessories
1. Rotate left until you hear a click.
2. Pull the accessory to remove it.
3. Insert the new accessory all the way down.
4. Rotate right until you hear a click, the new accessory is locked.

Drill Bits Set 2 3,45 €

Thu, 11 Jun 2026 06:55:07 +0200

Set with 10 precision drill bits for hobby use from 0.5 to 3.0 mm. Can be used with AK9006 shank or with any other drill shank (not included).

Contains sizess:
0.5, 0.8, 1.0, 1.2, 1.5, 1.8, 2.0, 2.3, 2.6, 3.0 mm

Drill Bits Set 1 3,45 €

Thu, 11 Jun 2026 06:55:07 +0200

Set with 7 precision drill bits for hobby use from 0.2 to 0.8 mm. Can be used with AK9006 shank or with any other drill shank (not included)

Contains sizes::
0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8 mm

Manual Drill Set 12,55 €

Mon, 08 Jun 2026 07:00:08 +0200

Pin vise hand drill and 20 pcs different sizes twist drill bits.
Includes 1 pcs hand drill, 20 pcs different size twist drill bits (0.3 to 1.6 mm). Perfect for drilling small holes in your models and miniatures, as well as arts and crafts projects.
A compact and easy-to-use tool. The hand pin vise features 3-jaw chuck and is able to clamp drills bits in the 0.2-3 mm range, keeping them upright and clamping them tightly. Sturdy and durable construction, black surface finish and non-slip design. Compact size, light, useful for working on plastic, resin, white metal alloys, wood, epoxy putty, air-curing clays and groundwork materials, and other not too hard materials (not appropriate for steel, stone, glass, or ceramic). This set includes an assortment of 20 HSS Micro Twist Bit sizes that cover most modelers needs.
How to use: the drill bits are very easy to install and loosen by rotating the head, then tighten the vise head while clamping the bit.

Hand drill with five drills 12,95 €

Mon, 08 Jun 2026 07:00:08 +0200

Practical hand drill with rotating head for easy and efficient working. Includes five drill bits in 1.0, 1.2, 1.4, 1.5, 1.8mm.

Mini Rechargreble Electric Drill 47,50 €

Mon, 08 Jun 2026 06:55:05 +0200

Hand drill 10,95 €

Sun, 07 Jun 2026 08:10:05 +0200

Steel Hand Drill
25xDrill Bits of Assorted Sizes:

5*0.5mm
3*1.0mm
2*1.5mm
5*0.6mm
2*1.2mm
2*1.8mm
2*2.0mm
2*2.4mm
2*3.0mm

Replacement Drills for 39064 7,25 €

Wed, 03 Jun 2026 07:23:43 +0200

Replacement drills for 39064 Hand Drill

Contains:
2x 0,7 mm
2x 1,0 mm
1x 1,3 mm

Hand Drill inc. 3 Drill Bits 14,50 €

Wed, 03 Jun 2026 07:23:43 +0200

Precise holes can be drilled on the model with the hand drill.

The drills supplied are precisely matched to the hole diameters (0.7 mm, 1.0 mm and 1.3 mm) commonly used at Revell.

DRILL BITS (0.4-1.3) 14,25 €

Sat, 30 May 2026 07:35:06 +0200

Set of ten carbide drill bits ranging from 0.4mm up to 1.3mm. They have a stem of the same measure to facilitate its use in any type of drill holder. They are presented in a transparent hard plastic case.

HAND DRILL PRECISION PIN VISE (0.2mm – 3.4mm) 11,55 €

Sat, 13 Jun 2026 07:20:05 +0200

Precision hand drill made of aluminum alloy and lacquered in black with the brand logo, valid for drill bits from 0.2 to 3.4mm. A very practical, precise and very efficient tool for all types of holes in the models or in any craft and jewelry work.

Warlord Pin Vice and Drill Bits 12,95 €

Sat, 18 Apr 2026 07:10:23 +0200

Handy holder for drills, taps, pins etc. Includes: 2 reversible collets with capacities 0 - 1,2 mm, 1,3 - 2,4 mm, 0,8 -2,0 mm and 1,8 - 2,9 mm. Incorporates swivel head for comfort and efficiency. Comes complete with 5 x 1mm drill bits.

Precision Hobby Pin Vise Set 17,50 €

Sat, 27 Jun 2026 07:45:06 +0200

Drill set including ten drills from 0.3 - 1.2 mm diameter.

Hand Drill 20,95 €

Mon, 01 Jun 2026 06:50:14 +0200

Length: 98 mm

The drill has a three-jaw chuck that closes very well, i.e. even the smallest drill diameters can be clamped. The maximum size for drills is 3.5 mm.

Meng Precision Hobby Pin Vise 33,95 €

Sat, 25 Apr 2026 08:35:05 +0200

Are you bored of the noise when you rotate your pin vise? Or do you need to spend a lot of time looking for it due to its unimpressive colour and small size? Now, you have another choice.

The MENG MTS-023 Precision Hobby Pin Vise Set has the following features: The one-piece forged handle is made of aluminium alloy. Treated by anode shot blasting, it has great appearance. The handle end features a quality bearing for smooth drilling and good hand feeling. Drill bits made of tungsten steel are sharp and strong. This will result in low drilling resistance and smooth removal of waste material. This set includes 0.4-1.3 mm drill bits which cover the needs of model building.

Pin Vice with 5 Drills 13,65 €

Sat, 18 Apr 2026 08:15:47 +0200

(1,0mm 1,2mm 1,4mm 1,5mm 1,8mm)

Fine Pivot Bit 0,8mm 5,75 €

Sat, 18 Apr 2026 07:10:23 +0200