Berliner Zinnfiguren/Paints & Tools/Helpers/Decal Accessories products

ULTRA Decal Set 4,75 €

Wed, 20 May 2026 06:45:15 +0200

High-quality decal solution essential to securing decals onto smooth model surfaces. This easy to use solution is as simple as moistening the surface and then placing the decal onto the surface previously gloss-coated in preparation for the decals. ULTRA-DECAL SET and dries within minutes, allowing you to continue modelling with the decals fixed in place . We recommend using ULTRA-DECAL FIX solution next and then adding a second coat of gloss varnish on top.

ULTRA Decal Fix 4,75 €

Sun, 07 Jun 2026 07:55:06 +0200

High-quality decal solution used to adapt and conform decals to the complex surfaces of your models. This easy to use solution is as simple as brushing ULTRA-DECAL FIX over the decal previously secured with ULTRA-DECAL SET which dries in minutes. The decals will conform to the raised and recessed surface details to apply markings perfectly adapted to the surface. We recommend sealing the decals with an application of GLOSSY LUCKY VARNISH A.MIG-2053.

Humbrol DecalFix 28 ml 7,45 €

Mon, 01 Jun 2026 06:55:10 +0200

A water-based solution for softening decals (wet decals) and fixing them. Brush the product onto the decals or soak the decals in the product for approx. 45 seconds. Drying time approx. 20-30 minutes. Remove excess agent with a damp cloth.

Humbrol DecalFix 125 ml 10,95 €

Sun, 19 Apr 2026 07:50:06 +0200

Vallejo Decal Softener17 ml 3,55 €

Tue, 16 Jun 2026 06:45:07 +0200

Decal Softener is a medium which protects the decal and smoothes its edges so that they blend with the surface of the model. Decal Softener also softens the decal to adapt it to surface details such as recessed lines, raised edges, screws or bolts.

Decal Fix 3,55 €

Tue, 23 Jun 2026 07:00:10 +0200

Decal Fix is a mat, water-based solution which protects the decal and smoothes its edges so that they blend with the surface of the model, and raised outline will not be visible. Apply Decal Fix with a soft brush and allow to dry. Various layers can be applied. The product contains acrylic resin and is neither flammable nor toxic. The application of a final varnisch, if desired, will not disturb the decal.

Product Guide: Decal Medium & Decal Fix 0,00 €

Sun, 19 Apr 2026 07:50:06 +0200

Decal Medium and Decal fix, usefull for placing wet decals over the model and increasing the adherence of the decal to the model.
José Brito

0,2 MB. English

Decal Tray 5,45 €

Mon, 08 Jun 2026 06:45:13 +0200

Dish for wet slide pictures, approx. 7.5 x 10 cm. With removable screen and small support. White plastic.

Decal Setter 3,15 €

Fri, 05 Jun 2026 07:05:14 +0200

Decal Setter makes it easier and increases adhesion of decals on smooth or slightly textured surfaces, helping them conform perfectly to the details of the model.

Decal Softener 3,15 €

Tue, 23 Jun 2026 07:30:09 +0200

Decal Softener softens and flexibilizes decals, allowing them to adapt to curves, corners, and reliefs without wrinkles or bubbles, achieving a professional and uniform finish.

Decal adapter solution 6,60 €

Thu, 04 Jun 2026 06:45:12 +0200

Liquid to adapt your decals to any surface. Wet the decal with the solution and a brush after place it. Leave for a few minutes, then with the help of the brush, adapt it to the surface to fully integrate it. With this product no decal will resist, no matter how complicated the surface be. And only with one product!

Decal Scissors 24,50 €

Wed, 24 Jun 2026 06:25:05 +0200

13,5 cm.

Decal Tweezers 22,50 €

Fri, 01 May 2026 07:05:08 +0200

12,5 cm.

Mark Fit Decal Medium 4,55 €

Tue, 23 Jun 2026 06:30:12 +0200

Mark Fit is a special solvent designed to soften your model decals which will allow you to apply them onto difficult to apply areas such as bumpy and curved surfaces, providing an improved finish to your scale model. The 40ml bottle contains a convenient brush for easy application.

How to Use
- Apply Mark Fit solvent to area where decal is to be positioned.
- Place decal onto the area.
- Slide decal into correct position by a wet finger.
- Use a soft cloth or cotton swab to remove excess water and any air bubbles.
- Apply Mark Fit over the decal again, and then use a soft cloth or cotton swab to conform it to the model's surface.
- Do not touch until decal dries completely.

Mark Fit (Strong) Decal Medium 4,45 €

Tue, 16 Jun 2026 06:25:05 +0200

Mark Fit is a special solvent designed to soften your model decals which will allow you to apply them onto difficult to apply areas such as bumpy and curved surfaces. This "strong" version has a more powerful formula for softening decals compared to the standard version. The Strong ersion help decals adhere and conform to difficult curved surfaces or matte-painted surfaces. In addition, it could also help speed up the decal application process. The Bottle cap comes with brush applicator and contains 40ml of solvent.
Note: May cause damage to painted surface in some cases, particularly surfaces painted with acrylic paints.

How to Use
- Apply Mark Fit solvent to area where decal is to be positioned.
- Place decal onto the area.
- Slide decal into correct position by a wet finger.
- Use a soft cloth or cotton swab to remove excess water and any air bubbles.
- Apply Mark Fit over the decal again, and then use a soft cloth or cotton swab to conform it to the model's surface.
- Do not touch until decal dries completely.

Decal Adhesive 5,65 €

Tue, 09 Jun 2026 06:20:05 +0200

Use this handy solution to apply decals which have been left too long in water and lost their adhesion. Simply apply to the surface of the model, and use water to remove any excess adhesive.
Features handy brush on reverse side of cap for application. 10ml bottle.

Decal Adhesive - Softener Type 5,35 €

Sun, 28 Jun 2026 07:20:05 +0200

Agent for attaching decals to your models. The agent contains a softener so that the decals can adapt well to the surface of the model.

Mark Fit Super Strong 5,45 €

Sun, 28 Jun 2026 08:30:05 +0200

The bottle comes with a brush applicator on the underside of the cap. Bottle contents: 40ml. This is a more powerful formula than other Mark Fit products and may damage some kinds of decal oraffect painted surfaces. Recommended for advanced users.

"Looks Like Glass" 100 ml 8,80 €

Fri, 26 Jun 2026 07:10:05 +0200

Looks Like Glass is a super- thin, water- based, transparent fluid for the creation of a smooth glass-like effect on kit plastics such as clear canopies. Plastic parts are simply dipped and allowed to dry for 2-3 hours. Surface detail is retained. Looks Like Glass can be used for the following modelling applications e.g.

- Glass like finish on canopies, windows etc.
- Adhesive for clear windows
- Creating a wet look on plastic
- Sealing scatter
- A super- thin smooth plastic varnish to assist transfer application.